Energy System 1 to 900 Vdc

For applications that draw currents in excess of 100 A, it is highly recommended to utilise voltages greater than 60 Volt.

 

The aentron lithium-ion energy system permits the realisation of a modular and scalable battery solution. The management of large lithium-ion batteries systems consists of two key standard components:

  • aentron Energy Controller (AEC)
  • Module Management System (MMS)

 

All aentron lithium-ion energy products can be combined with each other, used as standalone or in conjunction with products from other manufacturers or customer designs. Documentation for our range of products is available on request. All aentron battery products are compliant and ready for the following applications:

 

Standards:

  • E-Mobility / Automotive (ISO 26262 / IEC 61508 / ECE R10)
  • E-Maritime (ISO 16315:2016 / DNV GL)
  • E-Industry (IEC 61508 / Directive 2006/42/EC / 2014/35/EU )
  • E-Building (Directive 2006/42/EC / IEC 61508 / 2014/35/EU )

KEY FUNCTIONS & FEATURES:

  • CAN bus / USB
  • Data logging with Realtime Clock
  • In-system firmware updates via CAN or USB
  • Smooth closed loop controls
  • Management and monitoring of up to 98 modules per controller unit
  • Contactor drive capability
  • Heating and cooling controls
  • Series and Parallel string control
  • SoC and SoH calculation
  • Independent hardware safety layer
  • Full automotive operating temperature range (-40 °C to +80 °C)
  • Tightness: IP66
  • Redundant Power Supply DC-Out 12 V / 24 V DC: 150 W
  • High voltage isolation fault detection
  • High efficiency internal 12 / 24 V DC power supply.
    • Active power consumption 100 – 600 mW
    • Shutdown Power consumption 0 mW

INTERFACE:

  • CANopen bus communication (default 1000 kbit/s, 11-bit ID) (ISO 11898)
    • Provides access to all relevant system information with function and parameter modification
    • Enables communication between ENERGY CONTROLLER and customer application
    • Allows closed loop controls for charging and/or discharging to be established
    • Receives firmware updates via USB 1.1 to 3.0
  • Software minimum operating system: Windows 7 – 10
  • Galvanically Isolated to 1000 V DC

 

MECHANICAL & DESIGN FEATURES:

Robust design – Aluminium Die Cast Housing

Made in Germany